High Strength Melt Blown Polypropylene Filter Cartridge - 2 layer

HS-FCP High Strength Melt Blown Filter Cartridge are made from 100% polypropylene fine fibre, melted and blown to fuse together, with different porosity across the depth of the filter medium, effectively reducing pressure loss and stabilising filtration efficiency.

Ultra-fine polypropylene fiber leverages on its strong bonds to form a crystalline structure without any need for adhesives, and has a graded gradient. It combines the best of porous and fabric filters.

The cartridge has even porosity and filtration efficiency can reach as high as 99%. It is not easily clogged, dirt-holding capacity and has high rigidity and resistance to microorganisms. It is widely used in water and fluid treatment in the food and beverages industry.

Micron rating (Nominal): 0.5, 1, 3, 5, 10, 25, 50, 75, 100

Material: Polypropylene, Graded Density

Length: 508mm (20")

Outside Diameter: 64mm (2-1/2")

Inside Diameter: 25mm (1")

Temperature: 0.5°C to 80°C

Recommended Max Differential Pressure: 118 kPa (17.1 psi) @ 80°C, 206 kPa (29.9 psi) @ 60°C and 412 kPa (59.7 psi) @ 21°C

Features

• Excellent chemical compatibility
• No binders or additives
• Made of 100% high purity polypropylene melt-blown fibres
• Special two-layer structure provides low differential pressure and excellent dirt holding capacity
• Available in a wide variety of adapter/end cap configurations
• Material is validated by FDA CFR Title 21 and USP XXIII safety test
  

Please note: Minimum order or Minimum Quantity May Apply to this product